Certifications
 
 
  Exports to:

 
 

Products

 
 
  Ball Valves  
 
 
click to enlarge
click to enlarge

2 Way Ball Valves 2 piece
(View PDF Drawing)

2 Way Ball Valves 3 piece
(View PDF Drawing)

3 Way Ball Valves
(View PDF Drawing)

 

View Catalogues


BALL VALVES:

BAXCELL ball valves have very low operating torques and a range of seat materials providing excellent process environmental compatibility.  Our seats offer wide process compatibility whilst maintaining a positive sealing across the entire operating range. This high level of seat integrity allows both vacuum and high pressure services from one valve.  Recommended for use in Oil, Gas, Petrochemical and general duty applications where reliable long term performance is essential.  Stopper for ¼ turn shut-off is standard on all pressure ranges and sizes.

Valves with locking devices are available upon request.

BAXCELL ball valves are subjected to three pressure tests:
[a] Hydrostatic test at 1.5 times working pressure
[b] Low pressure pneumatic test at150 PSI (15 bar)
[c] Shell test to 1.5 times working pressure.

M. O. C : Body-ASTM A182 F / A 479/A 276 Gr. 316(L), 304(L) etc. All spares in ASTM A 479/A276 Gr. 316(L), 304(L).
Other M. O. C’s : Titanium, Monel, Hastelloy C. etc.

Valves can also be supplied as an option to NACE MR-01-75 (latest revision) suitable for sour service

 2 Way Ball Valve ( 2 Piece / 3 Piece Construction)

Features:

  • Blow-out proof bottom loaded stem. Low operating torque and with panel mounting facilities.
  • Heavy directional lever handle with PVC Sleeve.
  • End connections: 1/4" to 1" NPT/ BSP/ BSPT. (Female x Female, Male x Female & Compression ferrule tube fitting ends.)
  • Floating Ball design for positive sealing.
  • Working Pressure: 1500 to 3000PSI at 20 Deg C to 250 Deg C with PTFE Seat.
  • Full Port / Reduced Port design.
  • For SW connections, 3 piece constructions are standard

3 Way Ball Valve

Features:

  • 3-way on-off Switching Models.
  • Heavy directional Black Lever handle.
  • Blow-out proof bottom loaded stem. Low operating torque and with panel mounting facilities.
  • End connections: 1/4" to 1" NPT/ BSP/ BSPT. (Female x Female, Male x Female & Compression ferrule tube fitting ends.)
  • Floating Ball design for positive sealing.
  • Full Port / Reduced Port design.
  • Working Pressure: 1500 to 3000 PSI at 20 Deg C to 250 Deg C with PTFE Seat.
 
 
  -------------------------------------------------------------------------------------------------------------------------------

 
All Rights Reserved @ Baxcell Instrument Valves & Fittings Pvt. Ltd.